Mechanical Carbon Products
Carbon is perhaps one of the least known engineering materials, yet it is remarkably versatile. The surprisingly complex makeup of carbon lends it to properties, which are of particular interest to the designer and maintenance engineer.
Some of the properties include:
- Low wear rate
- Very high mechanical strength in compression
- High strength at elevated temperatures
- High strength to weight ratio
- Low modulus of elasticity
- Relatively low density
- High resistance to thermal shock
- Good electrical conductivity
- Excellent dimensional stability
- Self lubricating, providing a low coefficient of friction at high and low temperatures
- Chemically inert
- Non oxidising up to 550°C in dependant upon grade
- Easily machined to fine tolerances
Gland Packing Ring
Carbon gland rings are for sealing Water steam, Air and other gases.Gland rings are extensively used in steam turbines, both as pressure seals in high-pressure glands, and vacuum seals in low-pressure glands.
They are also used in many applications as air or gas seals in industrial plant on compressors, blowers and fans.
The two principle applications of use are:
■Power generation (steam, water and gas turbines)
■Chemical and petroleum industries
Mechanical Seal Ring
Carbon bearings are used where oil or grease lubricated bearings are unsuitable for use. Carbon/graphite bearings can run dry, using the natural lubricating properties of the carbon/graphite material, alternatively they can be fully immersed in liquids such as water, acids, alkaline solutions and solvents. It is preferable that the bearings are either fully immersed in the liquids or run completely dry.
Stoker Bush Bearing for Travelling Grate Boiler
As carbon is self-lubricating material used where conventional lubrication is not possible. Mainly used in travelling grate boiler & recovery boiler as stoker bush.
Thrust Pad, Thrust Bearing &Radial Bearing
for Submersible Pump for all model
- V4
- V6
- V8
- V10
- V12
Carbon Blanks.
Available in different grade of material.
Rotary Steam Joints.
Rotary Steam Joints are used in the production process of many industries like Paper making, Petrochemical, Plastics, Rubber and Textile etc. One of the most common application is in paper making where the wet paper supported on felt passes over a steam-heated drying roll.
Carbon vanes.
Vanes are used in rotary compressors,vacuum pumps and for the pumping of solvents and acids.
The three principle applications of use are;
■All industries where oil free compresse air and vacuum are required
■Food industry i.e. milking machines using carbon bladed vacuum pumps
■Fuel pumps
